VK Jelly - Pickling Paste / Gel for Stainless Steel
VK ® Jelly ® ( Gel / Paste form ) which is used to clean weld seams and surrounding areas and is applied with brush.
It is used to remove heavy scales, discolouration, annealing colours, rust particles near weld and welding affected area by heat without grinding or wire brushing or buffing.
Coverage : Approx. 100 meters of running weld seam / kg of VK Jelly
VK Jelly does not give Black or Yellow stain marks on surface after washing with water.
Application Steps :
1) K Jelly is applied on weld seam & surrounding areas with a nylon bristled plastic brush. Application Temp. = between 5 – 40 deg. C
2) Keep VK Jelly for 5 to 30 minutes (contact time) depending on contamination, temperature & grade of Stainless Steel.
3) Use pressurised water jet spray OR wipe the weld seam lightly with plastic brush & wash with water thoroughly.
Metal Cleaning Paste
Our pickling pastes and gels are specially intended for brush pickling of weld seams and smaller surfaces.
They offer a perfect paste consistency that gives good adhesion to difficult surfaces and reduces the risk of splashing.
SpatFreeTM – Nozzle is a new product that is specially meant for application on welding nozzles and improvement of life span of welding nozzles.
SpatFreeTM – Nozzle is suitable for use on fixtures of MIG, semi automatic & automatic etc. Welding equipment.
Application Procedure :
SpatFree TM – Nozzle creates an Anti-Spatter film on welding gun nozzles Cool the Nozzle gun and remove the impurities Remove spatters around the contact tip and inside the nozzle.
Packing : 300 gm bottle and 4 kg jar
Caution : Avoid contact with eyes as the material is slightly discomforting to the eyes. Avoid prolonged skin contact as it may cause drying of the skin. Use in a well ventilated area, however, SpatFree TM – Nozzzle is not normally a hazard due to the non-volatile nature of the product.