LPG regulator Gasco
- Size: 22mm, 25mm
- This regulator comes without gauge.
- Due to forged brass body it can withstand 1 ½ full cylinder pressure.
- Diaphragms is made of nylon reinforced neoprene rubber.
- Manufactured & tested as per IS: 6901 standard.
- Regulator is available for oxygen, acetylene, Nitrogen, argon, CO2 gases.
- Used for diverse applications like welding, heating, Cutting, brazing, research lab etc
Our Product
Contact info
FAQ
An LPG regulator is a device used to control the flow of liquefied petroleum gas (LPG) from a cylinder or tank to a gas appliance. It reduces the pressure of the gas from the tank to a lower pressure suitable for use in the appliance.
To attach a Gasco LPG regulator to a cylinder or tank, first, make sure the cylinder valve is closed. Then, remove the plastic cap from the regulator inlet and align the regulator inlet with the cylinder valve outlet. Finally, screw the regulator clockwise onto the cylinder valve until it is firmly in place.
Most Gasco LPG regulators have a flow control knob or lever that allows you to adjust the LPG flow rate. Turn the knob or move the lever to the desired flow rate, which is measured in cubic meters per hour (m³/hr) or liters per minute (LPM), depending on the regulator model.
Products
