NOVO ARC 200 EMC
Technology
- Half bridge topology, preventing magnetic saturation.
- Monitoring current feedback by shunt
- Ultrafast response
Performance
- Minimal spatter; Comfortable welding experience
- For acid and basic electrode etc. Imax diameter:3.2
- Good shaping
Interaction & Outlook
- Slop-designed front panel, visual operation.
- Small size, lightweight, portable
Simulation test
- Dust (iron dust) testing
- Falling and vibrating test
- Three month loading tetsing
Function
- Current knob
- Over heating, over current protection
- Self-adaptive arc force
- Built-in arc force
- Digital display
| Technical Parameter | Unit | NOVO ARC 200 EMC |
| Rated input voltage | V | AC230V±15% 50Hz |
| Rated input power | KVA | 9.2 |
| Welding current range | A | 20~200 |
| Welding current range | V | 20.8 ~28 |
| No-load voltage | V | 62 |
| Overall efficiency | % | 85 |
| Housing protection grade | IP | 21S |
| Power factor | cosφ | 0.7 |
| Insulation grade | - | H |
| Standard | - | EN60974-1 |
| Noise | db | ＜70 |
| Dimensions with handle① | mm | 305×112×190 |
| Weight | kg | 3.12 / 3.35 |
| Applicable electrode | mm | 1.6~4.0 |
| Output Connector Size | 16-25 | |
| VRD | Yes | |
| EMC | No | |
| Hot Start | Yes | |
| Self-Adaptive Arc Force | Yes | |
| Anti-Stick | Yes |
- 1 set of 3m 16mm² earth cable
- clamp/DKJ16-25
- 1 set of 2m 16mm² earth cable
- holder /DKJ16-25
Contact info
FAQ
NOVO ARC 200 EMC uses the MMA (Manual Metal Arc) welding process, also known as stick welding. This process is commonly used for welding thick materials and is suitable for outdoor welding.
NOVO ARC 200 EMC has a welding capacity of 20-200 Amps, which makes it suitable for welding materials of varying thicknesses.
.jpg)
.jpg)
